Enabler Bed is a custom-made device with 4 relays that allows controlling the up-down movements of the head and feet of a motored bed, using any of our controllers.
€630.00
Please note all prices exclude VAT
Overview
Enabler Bed is a custom-made device with 4 relays that allows controlling the up-down movements of the head and feet of a motored bed, using any of our controllers.
The Enabler is installed between the bed’s engine and its standard remote, avoiding to override the manual operation of the bed.
You can activate it remotely with any of our controllers
You will be able to control the movements of the bed in an accessible way
Does not override the manual operation of the control of the bed
Easy to install, without the need for further adaptations
A radiofrequency system that overcomes walls and obstacles
Available for different bed models, please ask us
Features
- This product is custom-made
- Supply voltage not needed (supplied from the bed)
- Controllable with our remotes
- Size: 104 x 59 x 36 mm
- Radio Frequency: 433 MHz
- Part of our environmental control solution
- Connect up to 2 different Enabler Beds on the same system
- Default connector: 8-pin DIN. Other options available
- Two operating modes selectable according to the code:
– Dead man.
– Forward by 3 seconds pulses.
Application Tips
Does this receiver work with any bed?
Its design is compatible with the most common automated beds. If you need to buy a new bed we can advise you on your purchase. If you already have a bed and you want a receiver ask us about compatibility.
Do you need to press continuously for the bed to be operated?
This receiver has two options: with a short press the bed will move until it finishes its run or you give a command to stop it, and with a long press, the bed will move during the time it is pressed.
Suitable For
- Physical disabilities: spinal cord injuries, multiple sclerosis, ALS, neuromuscular disorders
- Cerebral Palsy
- Brain injuries: ictus, traumatic brain injury
- Learning disabilities
